Install and configure QPST 2.7 to see your phone. Launch QPST's EFS Explorer. Start - (All) Programs - QPST - QPST Configuration. Click on the PORTS tab. You will be brought back to a list of PORTS with your phone listed as SURF 6xxx in the phone column. From the Start Client pull down, click EFS EXPLORER. Sep 08, 2019 After connection open QPST EFS Explorer and go to /nv/itemfiles/rfnv and find file 00028874. Copy this file to your computer. Scat (Qualcomm) This method works with Linux, Mac and Windows. This is scat-fork what save UE Capability Information message and 0xB0CD hardware combos to qmdl file. This work example Samsung devices with Qualcomm-modems. 6) EfsExplorer: - Enable reset button in Efs Explorer even if target not in offline mode. More text description in Mode column for Efs Explorer - Modify the list context menu of Efs-Explorer. If the proposed item file size copy is 2048 bytes, warn the user and bail out. After connection open QPST EFS Explorer and go to /nv/itemfiles/rfnv and find file 00028874. Copy this file to your computer. Scat (Qualcomm) This method works with Linux, Mac and Windows. This is scat-fork what save UE Capability Information message and 0xB0CD hardware combos to qmdl file. This work example Samsung devices with Qualcomm-modems.
In eHRPD network, device equipped with Qualcomm chipset uses profile information to attach to PDN.
Below are details on how to configure profile files and make data call via QMICM:
1. Open Qualcomm QPST configuration software, select EFS Explorer:
2. Select correct Port and click OK:
3. Wait couple seconds and you will see the file system inside device. Click on application_specific_profiles, you should see some profile files. The naming convention is “profile” followed by an underscore, followed by the profile ID, e.g., a file named profile_101.txt uses profile ID 101:
Note: Some devices (e.g. Qualcomm FFA) have profiles 101-107. Some devices (e.g. Pantech UML290) have 5 profiles as shown in above picture, and profile_000 is used by default if don't specify a 3GPP2 Profile ID in QMICM during call setup.
4. Pay attention to Profile ID, APN_String and PDN_IP_Version_Type. These values will be used later during call setup.
5. If you need modify the profiles, following are the instructions:
a) drag the profile onto desktop, modify, and then drag back to EFS window to replace the old profiles.
b) Reboot device.
c) Open EFS Explorer again, ensure your change to these profiles take effect. And then close EFS Explorer.
6. Open QMI Connection Manager, select an interface from the Select Device drop-down list. If the correct USB drivers are installed, one or more devices should appear in this list. Select the checkbox ahead of Technology Preference and set it to 3GPP2. Select the checkbox ahead of IP Family Pref and choose the IP type:
Note:
a) If you don't specify 3GPP2 Profile ID, profile_000.txt will be used by default.
b) For some devices, 3GPP2 Profile ID is mandatory, otherwise you will see an exception after click CONNECT. This mostly happens when device doesn't have a default profile file.
7. Click CONNECT to bring up the call. Once the call is connected, the button will change to DISCONNECT. Click DISCONNECT when you are ready to disconnect the call.
This is a step by step guide to unlock glo bolt mf60 3g mifi
Qpst Efs Explorer
Requirements
- Windows MF60 drivers
- QPST
- MF60 Firmware installer
- MF60 Installer patch
- DC Crap (download @ [ Login / Register to download free] )
- MF60 Mifi device to be unlocked
- A good USB cable
- Search for the tools online OR download all the tools @ [ Login / Register to download free]
How to Unlock Glo Bolt MF60
- Remove the sim from the device
- Connect the MF60 device to your PC using a USB cord
- Install the MIFI's software from My computer. (you can skip this step if you've already installed it)
- Extract the contents of the Glo Bolt MF60 zip file you downloaded
- Run the firmware installer, without doing anything else! It will detect what port the device is connected to. Remember this port and don’t disconnect the equipment so the port number won’t change.
- After you must have seen the port number, you can go ahead and close the firmware installer.
- Install QPST from the extracted zip file.
- After the installation open Start > QPST > QPST Configuration.
- If the equipment is not automatically listed on the list, manually add the port you saw in the firmware installer.
- To add a new port, push the button “Add New Port...”
- After the modem is successfully detected in QPST Configuration open:
- Start > QPST > EFS Explorer
- In EFS Explorer, on the left side, click the “/” to go to the root of the equipment’s file system.
- On right side more folders and some files. Be very careful what you do there so you won’t delete anything by mistake.
- Save the files 'Version' and 'Config', in order to have a backup. (if something goes wrong copy them back).
- Delete the files 'Version' and 'Config'.
- Exit all QPST windows.
- Run the MF60 Firmware installer.
- While the installer is still open, run and apply the MF60-patch from the extracted zip file.
- After applying the patch you can press the update button on the installer.
- If it gets stuck at 19/100,
- Disconnect the device,
- Remove and put back the battery,
- Close the firmware installer windows,
- Manually power ON the device,
- Connect the device back to the PC through USB then..
- Run DC-unlocker
- Select ZTE datacards
- Use auto detect
- Click the search button
- Once the device has been detected, click on the unlocking tab
- Click on Unlock
- Device should be unlocked now (test by putting a foreign sim)
Qpst Efs Explorer Volte
Important Notice
- This unlock method is meant to unlock the MF60 MIFI device but was reconstructed for GLO BOLT MF60.
- If you intend to try it out, I shall not be held responsible for any damages caused.
- If you are not comfortable with the procedure, then i suggest you use DC unlocker to unlock your device
Qpst Ef-s Explorer Download
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.